XENO XDR5, Setup And User'S Manual

Page: 176 / 231

176
Xeno XDR5 real time DVRs manual V1.0
SMTP Server: The SMTP Server IP address or host name (e.g., smtp.xxxx.com).
SMTP Port No.: The SMTP port. The default TCP/IP port used for SMTP is 25.
Enable SSL(optional): Click the checkbox to enable SSL if required by the SMTP server.
Sender: The name of sender.
Sender’s Address:
The Email address of sender.
Select Receivers: Select the receiver. Up to 3 receivers can be configured.
Receiver: The name of user to be notified.
Receiver’s Address:
The Email address of user to be notified.
Enable Attached Pictures: Check the checkbox of Enable Attached Picture if you want to send email with
attached alarm images. The interval is the time of two adjacent alarm images. You can also set SMTP port
and enable SSL here.
Interval: The interval refers to the time between two actions of sending attached pictures.
E-mail Test: Sends a test message to verify that the SMTP server can be reached.
6. Click the Apply button to save the Email settings.
7. You can click the Test button to test whether your Email settings work. The corresponding Attention message
box will pop up.
Figure 9.10
Email Testing Attention
10.2.4 Configuring FTP Server
Purpose:
The FTP can be configured on your DVR to realise dual-directional transmission of control files over Internet. And the
captured pictures of DVR can be uploaded to FTP server as well.
Steps:
1. Enter the Network Settings interface.
Menu > Network > Network Settings
2. Select the FTP tab to enter the FTP Settings interface.