XENO XDR5 Setup And User'S Manual Download Page 177

Page: 177 / 231

177

Xeno XDR5 real time DVRs manual V1.0

Figure 9.11 FTP Settings Interface

Check the

Enable FTP

checkbox to enable this feature.

Configure the NTP settings, including FTP server, port, user name, password and the directory.

Figure 9.12 Configure FTP Settings

Directory:

In the

Directory

field, you can select the Root Directory, Parent directory and secondary

directory. When the Parent Directory is selected, you have the option to use the Device Name, Device No or

Device IP for the name of the directory; and the when the Secondary Directory is selected, you can use the

Camera Name or Camera No. as the name of the directory.

Click the

Apply

button to save and exit the interface.

Note:

Please make sure the remote FTP server has been started up before setting the FTP parameters.

Summary of Contents for XDR5








































































































































































































































Search results

Summary of Contents for XDR5

Reviews:

Related manuals for XDR5

Brands by name

Popular brands

XENO XDR5, Setup And User'S Manual

Search results

Summary of Contents for XDR5

Reviews:

Related manuals for XDR5

Brands by name

Popular brands