XENO XDR5, Setup And User'S Manual

Page: 43 / 231

43
Xeno XDR5 real time DVRs manual V1.0
2.5 Starting Up and Shutting Down the DVR
Purpose:
Proper startup and shutdown procedures are crucial to exptend the life of the DVR.
Before you start:
Check that the voltage of the
power supply is the same with the DVR’s requirement, and the ground connection is
working properly.
Note By default the DVR boots to all-day recording.
Starting up the DVR:
Steps:
1. Check the power supply is plugged into an electrical outlet. It is HIGHLY recommended that an Uninterruptible
Power Supply (UPS) be used in conjunction with the device. The Power indicator LED on the front panel should
be red, indicating supply is on.
2. Press the POWER button on the front panel. The Power indicator LED should turn blue indicating that the unit is
booting up.
3. After boot up, the Power indicator LED remains blue. On the screen a row of icons at the bottom shows the
HDD status. ‘X’ means that the HDD is not installed or cannot be detected.
Shutting down the DVR
Steps:
There are two correct options for shutting down the DVR:
• OPTION 1: Standard shutdown
1. Enter the Shutdown menu.
Menu > System->Basic->Shutdown