XENO XDR5, Setup And User'S Manual

Page: 35 / 231

35
Xeno XDR5 real time DVRs manual V1.0
and spot output, spot output only have channel selecting from numeric key.
9
ALARM Alarm indicator turns red when a sensor alarm is detected.
ARMED
Armed indicator turns blue when the device is in armed status; at this time, an
alarm is enabled when an event is detected. The indicator turns off when the
device is unarmed. The arm/disarm status can be changed by pressing and
holding on the Panic button for more than 5 seconds in live view mode.
HDD HDD indicator blinks red when data is being read from or written to HDD
HEALTH Health indicator is normally blue, indicating that the DVR is functioning properly.
NET NET indictor blinks blue when network connection is functioning properly
COMMS
Comms indicator turns blue when DVR is controlled by an IR remote. Indicator
turns red when controlled by a keyboard.
Note: If ARMED indicator is blue (default), all the alarm event and exception settings are valid. Otherwise, alarm event
and exception settings are invalid, but normal recording is still available.
Note: It is important to note that you must press the ENTER button on either the remote or front panel on a text field
before you’re able to edit its content. After you’re done entering text, you must hit the ENTER button to be able to move
on to the next field.