XENO XDR5, Setup And User'S Manual

Page: 52 / 231

52
Xeno XDR5 real time DVRs manual V1.0
4.2 Operations in Live View Mode
In live view mode, there are many functions provided. The functions are listed below.
•
Camera : showing only one screen on the monitor.
•
Multi-screen: showing multiple screens on the monitor simultaneously.
•
Start/Stop Sequence: the screen is auto switched to the next one. And you must set the dwell time for each
screen on the configuration menu before enabling the auto-switch.
Menu>Display>Live View>Non Event Sequence Dwell Time
•
Play: play back the recorded videos for current day.
•
Log Off: log out current user whom already logged in.
•
Alarm Cancel/Panic:
Cancel the latest active alarm, start panic recording if there isn’t any alarm active.
Note: It is recommended that either the HDMI or VGA is used as the main monitor output. If the composite CVBS output
is used then the e is reduced functionality.
4.2.1 Front Panel Operation in Live View
Table 3.3 Front Panel Operation in Live View
Functions Front Panel Operation
Show single screen
Press the corresponding Alphanumeric button. E.g. Press 2 to display only the
screen for channel 2.
Show multi-screen Press multi-screen button.
Manually switch
screens Next screen: right direction button.
Previous screen: left direction button.
Sequence Press Enter button.
All-day playback
Press Play button.
Switch between main
and aux output Press Main/Aux button.