XENO XDR5 Setup And User'S Manual Download Page 222

Page: 222 / 231

222

Xeno XDR5 real time DVRs manual V1.0

12.1 Searching & Export Log Files

Purpose:

The operation, alarm, exception and information of the DVR can be stored in log files, which can be viewed and
exported at any time.

Steps:

Enter the Log Search interface.

Search > Log > Log Search

Figure 11.1 Log Search Interface

Set the log search conditions to refine your search, including the Start Time, End Time, Major Type and Minor
Type.

Click the

Search

button to start search log files.

The matched log files will be displayed on the list shown below.

Note:

Up to 2000 log files can be displayed each time.

Summary of Contents for XDR5








































































































































































































































Search results

Summary of Contents for XDR5

Reviews:

Related manuals for XDR5

Brands by name

Popular brands

XENO XDR5, Setup And User'S Manual

Search results

Summary of Contents for XDR5

Reviews:

Related manuals for XDR5

Brands by name

Popular brands