XENO XDR5, Setup And User'S Manual

Page: 39 / 231

39
Xeno XDR5 real time DVRs manual V1.0
13 NET Interface Connector for Network.
14 Termination Switch
RS-485 termination switch. Up position is not terminated.
Down is terminated with 120
Ω resistance.
15
RS-485 Interface
Connector for RS-485 devices. T+ and T- pins connect to R+ and R-
pins of PTZ receiver respectively.
Controller Port Not operational for future use
ALARM IN Connector for alarm input.
ALARM OUT Connector for alarm output.
16 GROUND Ground (needs to be connected when DVR starts up).
17 AC 100V ~ 240V AC 100V ~ 240V power supply.
18 POWER Switch for turning on/off the device.
2.4.2 Rear panel description for XDR5D
Figure 1.3.2 Rear Panel of 16-ch device
Table 1.4.2 Descriptions of the Rear Panel Interfaces
No. Item Description
1 VIDEO IN BNC connector for analogue video input.
2 LOOP OUT BNC connector for loop output.
3 VIDEO SPOT OUT BNC connector for video output.
4 VIDEO OUT
BNC connector for video output. If HDMI/VGA is connected, the
interface is used for spot output only with local video display,
playback, recording and PTZ controls. If HDMI/VGA is not connected,