![background image](http://html1.mh-extra.com/html/xantech/splcd39g/splcd39g_installation-and-programming-manual_3180568056.webp)
Page: 56
SmartPad LCD
© 2003 Xantech Corporation
SmartPad LCD 6.4” VIDEO: VIDEO CONNECTION & PROGRAMMING
SmartPad LCD™ 64V:
The SmartPad LCD 64V includes the same features as the 64G
(Graphics version) now with
PiP
and
Full Screen
video display. This
version also allows for “Trasparent Button” Overlays presenting a
clear & seamless integration for video menu device control.
Software Note:
This panel and its features must be accompanied with
Dragon Drop-
IR (SPLCD) Version 1.2.0
or above and
Firmware Version 1.29
or
above.
Checking Software
Version:
To check the software version, open Dragon Drop-IR (SPLCD) and
click on the
HELP
Menu and select
ABOUT.
The Software version
shall be noted at the top of the pop-up window. If it is not noted or
the version does not read 1.2.0 or higher, please see
www.xantech.com
and download the latest version of Dragon Drop-
IR SPLCD.
Checking
FirmwareVersion:
To check the SPLCD64V for proper firmware version, connect the
panel to the PC running Dragon Drop-IR (SPLCD) and click on the
Base Unit
Menu and select
WHO AM I
from the drop-down menu.
Video Connections:
Connect the composite video signal to the SPLCD 64V via the BNC
connection labeled
VIDEO IN
on the rear of the panel.
A buffered composite video signal can also be run OUT of the panel
to a main Video Monitor in the Zone if desired. To do this, connect a
coax cable to the BNC connection labeled
VIDEO OUT
on the rear of
the panel.
VIDEO BRACKET SUB-ASSEMBLY
MOUNTED ON LEFT SIDE (1ST OPTION)
VID
EO
OU
T
VID
EO
IN