SmartPad LCD
Page:
61
© 2003 Xantech Corporation
Programming SPLCD for
MRC88 Functionality:
Once Dragon Drop SPLCD is configured for MRC88 Keypad Emulation, you
can now point each GTL on the SmartPad LCD™ to a specific macro within the
MRC88 Controller.
1. Click on the MACROs Tab to lock in the current GTL button layout.
2. Select a Source Button in the SPLCD Systems Window.
3. Click on the PALETTES menu and select
Internal Commands
from
the drop-down menu.
4. Click
on
Backlight Set
in the Internal Command Window and select
MRC88 Button Id from the drop-down menu.
These are pointers to buttons within the MRC88 Controller. Whatever Macro is
programmed within the MRC88 under these buttons, the SPLCD can now
execute these Macro’s.
5. Scroll through the list and associate SPLCD buttons to Macros
programmed under specific buttons within the MRC88 Controller. I.e.
Click on a Source Button and then select
Src 1
from the MRC88 Button
Id list as in the example below.
6. Repeat above for all of the Source Buttons.
7. Repeat the same procedure for PLAY STOP PAUSE etc……
8. You can even assign SPLCD GTL Buttons to an MRC88 Tier 2 Macro.
For example: Assign the 5 Motion control buttons to as Tier 1 PLAY
STOP PAUSE etc… In your MRC88 Project program Tier 2 of the
PLAY STOP PAUSE etc.. buttons as MENU Navigation buttons and
Name Each Source
as it appears in the
DragMRC Project.
