![background image](http://html1.mh-extra.com/html/xantech/splcd39g/splcd39g_installation-and-programming-manual_3180568054.webp)
Page: 54
SmartPad LCD
© 2003 Xantech Corporation
PROGRAMMING SPLCD FOR USE WITH MRC88 (ZONE CONTROL)
1. Open a new Project (CTRL+N)
2. Choose the Base Unit (3.9G, 6.4G/V)
3. Select the Style
4. Place 8 Source GTL’s (or as many as needed for that Zone) onto the SmartPad LCD Systems Window
5. Open the RC68+ Command Palette (Hit
F5
on the Keyboard)
6. Select the OPTIONS TAB on the RC68+ Command Window
7. Under MODEL select MRC88 and verify the Code Group setting is the same as that of the Zone on the
MRC88 (Default Code Group =
A8
). Click on the Palette TAB to return to the RC68 Command window.
8. Click on a Source Button GTL in the SPLCD Systems Window that will select the component connected
to INPUT 1 on the MRC88 (i.e.
CD
as shown in
Figure 36
.
9. Select INPUT 1 on the RC68+ (00 Button) and verify the proper command description is shown in the
Macro Command List Window
10. Repeat for all Source Input GTL’s
11. Add a Source GTL and Label for OFF (if desired).
a. With the OFF GTL selected, press OFF (button 68) on the RC68+ Command Window and
verify the command as shown in the Macro Command List window.
12. Under each Source Page add Volume Buttons, MUTE or other commands as desired and place the
appropriate RC68+ command under the GTL button.
Figure 36 – Programming SPLCD for MRC88 IR Control
Note:
To create
Toggle
POWER or MUTE commands, program the MRC88 (or 44) for
Toggle
POWER or
MUTE
Internal Amplifier Commands
under the RC68+ Trigger Sequencer within the DragMRC software
(Refer to the MRC88 Manual; Section 5: RC68+ IR Code Triggered Sequencer) See
Figure 37a
below.
Place the same RC68+ IR commands under the designated GTL button in the SPLCD Software. See
Figure 37b
below.