3
Controllers
Smart Pad
3
The
CM1N
is similar to the CM1F except that it is set up for use with 6 numeric control buttons as well as
the 5 cursor keys.
Numeric
and
cursor
buttons are included.
The
CM1F
module includes 6 function control keys plus a cursor button cluster with Up, Down, Left, Right,
and Enter keys. The cursor keys can be used with sources that have menu driven on-screen displays.
Cursor
keys and a selection of
function
buttons are included.
The
CM4
is similar to the CM1F except that it is set up for use with 4 source (bank) and 2 function keys as
well as the 5 cursor keys.
Cursor
keys and a selection of
source
and
function
buttons are included.
The
CM6
is similar to the CM1F except that it is set up for use with 6 source (bank) keys as well as the 5
cursor keys.
Cursor
keys and a selection of
source
buttons are included.
The Base Modules
There are three base modules in the
SmartPad
3
system into which the Key Modules are docked. They
contain the electronics for programming & memory (except the EM110) and include flanges for J-box
mounting. An illustration and description of each follow:
CM1N
CM4
CM6
CM1F
CLR MEM
RESTORE
NETWORK
PGM
TRNS
XFER
ERR
CNCL
FULL
DEL
EDIT
DELAY
SEQ
IR
STEP
C
O
M
B A 9 8 7 6
5
4
3
2
1
0
F
E
D
C
PROTECT
WRITE
NETWORK
ADDRESS
PM110
LM110
NETWORK
RESTORE
COM PORT
B A 9 8 7 6
5
4
3
2
1
0
F
E
D
C
WRITE
NETWORK
ADDRESS
PROTECT
EM110
The PM110 dual gang
Programmable Module
is the base module for programming all of the commands
and functions required for each installation. All programming, including sequences (macros), is done with
the PM110 (unless done with Dragon Drop-IR™).
The LM110
Learning Module
is intended for single gang applications and must receive its programming
from a PM110 or Dragon Drop IR™ system. Programs are transferred from the PM110 or Dragon Drop IR
to the LM110 with a 2-step transfer command.
The EM110 is a single gang
Expansion Module
. It has no memory and serves only to expand the number
of key functions for the PM110 in 3-gang configurations.
