26
Smart Pad
3
NOTE:
The LM110 does not have a memory clear button since the memory is essentially cleared each time
a transfer is made to it from a PM110 or Dragon Drop IR™. Simply pressing RESTORE (or removing and
reapplying power), before data transfer, will normally clear any problems related to LM110 memory
conditions.
Exceeding Memory Limits
With the large memory capacity of the PM110 at 32k and the LM110 at 8k, it is unlikely that you will ever
exceed the limit, especially when manually programming. If you should exceed the limit, however, the FULL
indicator will light on the PM110. If you try to transfer more than 8k to the LM110, the PM110 ERR LED will
light at the beginning of the transfer. In either case, you will have to press RESTORE on both units and then
"off-load" some commands and rearrange your project to stay within the memory limits.
MOUNTING
The SmartPad
3
system mounts in standard one, two and three gang "J-box" configurations, in basically the
same way as other wall mounted decorator style components. A few things to keep in mind are as follows:
NETWORK
RESTORE
COM PORT
B A 9 8 7 6
5
4
3
2
1
0
F
E
D
C
NETWORK
ADDRESS
WRITE
PROTECT
WRITE
READ
1-3/4"
(
LM110
)
1-1/8"
(
EM110
)
Key
Module
EM110
LM110
2-3/4"
1/2"
TAPE
TUNER
CD 1
CD 2
VOL
VOL
MUTE
OFF
CLR MEM
RESTORE
NETWORK
PGM
TRNS
XFER
ERR
CNCL
FULL
DEL
EDIT
DELAY
SEQ
IR
STEP
C
O
M
B A 9 8 7 6
5
4
3
2
1
0
F
E
D
C
PROTECT
WRITE
NETWORK
ADDRESS
RANDOM
A/B
DISC
–
DISC
+
TAPE
TUNER
CD 1
CD 2
OFF
VOL
VOL
TNR
TNR
A M / F M
MUTE
2-3/4"
1-5/8"
Key
Module
PM110
1/2"
PM110
(shown with a KM1F & a KM4)
LM110/EM110
(shown with a KM4)
Fig. 32
Fig. 33
• The PM110 and LM110 require considerable room in the J-box.
• For retrofit (existing construction) applications, use high volume boxes, such as the 2-gang Slater
Retrofit 32 cu. inch box, or Xantech's Model SLB2 2-gang retrofit box.
• For new construction, most high volume J-boxes will work. A "P" ring could also be used.
•
NOTE:
Be sure to check fit
before
buying large quantities of J-boxes or P-rings for the job.
• Avoid high moisture applications such as showers, steam rooms or outdoor locations. For such
applications, use Xantech's "
THE WATERPAD™
" ( a membrane version of the SmartPad
3
).
