X2E XORAYA ML-Z7, User Manual

Page: 92 / 208

U
SER
M
ANUAL
X
ORAYA
Z7 | X
ORAYA
ML-Z7
X
ORAYA
S
UITE
92
PROTOCOL_CCP
PROTOCOL_CCP_SPY
The available modes (Master, Spy) depend on the
activation of these licenses.
Check in category
Versions of system settings to verify
which licenses are activated for your datalogger.
(
➔
Versions)
Setting Description Default
Enable Turn on logging for this channel Off
Spy CCP
traffic CCP mode
On : Spy (external communication is monitored,
no sending)
Off : Master
Off
Alias Freely selectable channel name ccp#
Bus ID Additional ID for subsequent evaluation
Prevent Sleep
Mode Datalogger will not go into sleep mode as long as
there is activity on this channel Off
Source Physical CAN channel to be used Can_1 (can1)
A2L file Description file, which is suitable for the ECU and
is loaded to configure the CCP connection
Selection file Signal filter file (XML, CFG or LAB), which contains
a (pre-)selection of the signals to be monitored
Retry max Maximum number of retries after unsuccessful
connection attempt 3
Data timeout No data received for this period of time (in s)
leads to an error
10
Meaning of the symbols for the physical CAN channels:
transmission-capable
transmission-capable, but currently set to passive
not transmission-capable
not enabled
Via Edit CAN interface channel (2) button, you can enable it, activate its
transmission capability or change its baudrate if necessary.