X2E XORAYA ML-Z7, User Manual

Page: 22 / 208

U
SER
M
ANUAL
X
ORAYA
Z7 | X
ORAYA
ML-Z7
P
RODUCT DESCRIPTION
22
General status LEDs (D):
These LEDs indicate the operating status of the datalogger.
LED Meaning
Connect Connection between datalogger and X
ORAYA
Suite is established
Info Datalogger is DHCP server
Logging Logging in progress
LED flashes as the logging stops, because the stopping process
may take longer depending on the queue fill level
Error Flashes when restarting after the power supply was interrupted and
the datalogger could not shut down safely
In addition, the
HDD LED flashes while the file system is being
repaired
Service Lights up constantly when the datalogger is in firmware update or
recovery mode
Displays different error codes by flashing
HDD Flashes when accessing the storage medium
ext.HDD Lights up when cable connection to X
ORAYA
ESU is established
▪
Red: connection enabled (locked)
▪
Green: connection disabled via button (unlocked)
Aux Lights up constantly when one of the additional interfaces without
hardware slot (for example GNLog, Button) is activated
Flashes when messages are received
LAN host ports (E):
The datalogger features four ports to connect to a switch or directly to a PC.
This is necessary to control the datalogger via software and exchange data.