X2E XORAYA ML-Z7, User Manual

Page: 64 / 208

U
SER
M
ANUAL
X
ORAYA
Z7 | X
ORAYA
ML-Z7
X
ORAYA
S
UITE
64
The following check boxes affect the IDs of the specified CAN messages in
this category:
▪
Extended frame Use 29-bit ID instead of 11-bit ID
▪
Can FD Activate CAN FD mode
▪
Bit Rate Switch Transfer payload with CAN FD baudrate
(Requirement:
Can FD selected)
Configure triggers:

Select the check box Enable Trigger from following CAN message .
 Under Id , specify the ID of the CAN message that raises a trigger.
(
➔
Changing the numbering system)
 Select the check boxes Extended Frame , Can FD and Bit Rate Switch as
desired.

Specify the Number of bytes for the trigger (1) .

Select one of the 8-byte blocks of the trigger (2) for editing.

Specify the bytes of this payload block. (
➔
Set bits)

Specify further 8-byte blocks of this trigger.

Repeat as necessary for up to a total of five triggers.
The following CAN messages are preconfigured as triggers:
ID Byte 1 Byte 2 (X = "don't care")
1d6 C8 1X
1d6 C4 1X
1d6 F8 DX
1d6 F4 DX
7b7 00 XX