X2E XORAYA ML-Z7 User Manual Download Page 186

Page: 186 / 208

SER

ANUAL

ORAYA

ML-Z7

TORAGE

TRANSPORT AND DISPOSAL

186

Storage, transport and disposal

7.1

Storage

If the datalogger will remain unused for an extended time, we recommend
storing it in the original packaging.

Please note the following storage conditions:

Air temperature

Rel. humidity

Storage conditions

-40 to +85 °C

10 to 95 %

Adopt the following precautions to avoid damage to the datalogger:



Protect the datalogger from intense sun, heat, as well as from severe
shocks.



Do not place heavy objects on the datalogger.



Store the datalogger in a dry, dust-free and ESD safe area.

7.2

Transport

Transport the datalogger only in the original packaging.

Please note the following transport conditions:

Air temperature

Rel. humidity

Transport conditions

-30 to +75 °C

10 to 95 %

Summary of Contents for XORAYA ML-Z7

















































































































































































































Search results

Summary of Contents for XORAYA ML-Z7

Reviews:

Brands by name

Popular brands

X2E XORAYA ML-Z7, User Manual

Search results

Summary of Contents for XORAYA ML-Z7

Reviews:

Brands by name

Popular brands