X2E XORAYA ML-Z7, User Manual

Page: 62 / 208

U
SER
M
ANUAL
X
ORAYA
Z7 | X
ORAYA
ML-Z7
X
ORAYA
S
UITE
62
Setting Description Default
Enable Turn on logging for this channel On
iso CAN FD standard
On : ISO 11898-1
Off : original standard by Bosch
On
Alias Freely selectable channel name can#
Bus ID Additional ID for subsequent evaluation
Baudrate Transfer rate (in bit/s)
Values: 100 k, 125 k, 200 k, 250 k, 400 k,
500 k, 666 k, 800 k, 1000 k 500 k
Protocol Classic CAN or CAN-FD Classic CAN
Baudrate (FD) Transfer rate for the payload section of a
CAN FD message (in bit/s)
Values: 500 k, 1000 k, 2000 k 2000 k
Use Busspec Load configuration template provided by the
vehicle manufacturer Off
Prevent Sleep
Mode Datalogger will not go into sleep mode as
long as there is activity on this channel On
Wake Datalogger wakes up from sleep mode as
soon as there is activity on this channel On
Acknowledge/
Send Acknowledgment and transmission capacity
Send and acknowledge :
Datalogger operates in active mode on the
CAN bus (transmission possible,
acknowledgment of CAN messages,
generation of error frames)
passive (not send/acknowledge) :
Datalogger operates in passive mode on the
CAN bus (receipt possible, no
acknowledgment of CAN messages, no
generation of error frames)
Send but NOT acknowledge :
Datalogger operates in semi-passive mode on
the CAN bus (transmission possible, no
acknowledgment of CAN messages, no
generation of error frames)
passive
(not send/
acknowledge)
autoacknowledge
self transmitted
message Messages sent by the datalogger are
automatically acknowledged Off