X2E XORAYA ML-Z7, User Manual

Page: 87 / 208

U
SER
M
ANUAL
X
ORAYA
Z7 | X
ORAYA
ML-Z7
X
ORAYA
S
UITE
87
Setting Description Default
Enable Turn on logging for this channel Off
Alias Freely selectable channel name gnlog# or
DLT#
Bus ID Additional ID for subsequent evaluation
Source TCP (GNLog, DLT) or UDP (only DLT)
IP address and port of the ECU
Default sets the port to 851 (GNLog) or 3490
(DLT)
Use Busspec Load configuration template provided by the
vehicle manufacturer Off
Prevent Sleep
Mode Datalogger will not go into sleep mode as long
as there is activity on this channel On
Debug level Detail level of the debug information
GNLog: 0 to 3 (max)
DLT: 0 (None) to 6 (Verbose) GNLog: 2
DLT: 0 (None)
Trace state* Send trace messages Off
Verbose mode* Off : Send only dynamic data
On : Send dynamic and static data
Off
VLan Id Check box activates VLAN ID according to IEEE
802.1Q
Values: 1 to 4095 1
IP address IP address which the datalogger uses in the
communication with the ECU 0.0.0.0
IP mask Network mask which the datalogger uses in
the communication with the ECU 0.0.0.0
* Only for DLT