X2E XORAYA ML-Z7 User Manual Download

Page: 55 / 208

SER

ANUAL

ORAYA

ML-Z7

ORAYA

UITE

Load

default

profile:



Press the default button for at least 3 seconds.

Protect

active

profile:



Enter a

Password



Click

Activate password protection

(1)



In the main toolbar, click

Save changed configuration permanently



Disconnect and reconnect again to the datalogger.



The

active

profile is protected:

With enabled password protection, you can still temporarily save settings
and create profiles, without needing to enter the password.

1 Unlock password protection

Unlock password protection for

active

profile:



Click

Unlock password protection

(1)



In the newly opened window, enter the correct

Password



Click



The password protection is unlocked:

Reset password

If you have forgotten your password, you can reset the
datalogger. (

➔

Resetting to factory defaults)

As you do so, the password as any other configuration
changes will be reset.

Summary of Contents for XORAYA ML-Z7

















































































































































































































Search results

Summary of Contents for XORAYA ML-Z7

Reviews:

Related manuals for XORAYA ML-Z7

Brands by name

Popular brands

X2E XORAYA ML-Z7, User Manual

Search results

Summary of Contents for XORAYA ML-Z7

Reviews:

Related manuals for XORAYA ML-Z7

Brands by name

Popular brands