X-Rite 939, Operator'S Manual

Page: 77 / 108

C H A P T E R F I V E
5-20
4.
Continue with additional measurements as required to
fulfill averaging sequence.
Sample Database Tools
The Sample Database Tools menu allows you to transmit data
to a computer or printer and delete stored sample data. If the
storage feature is not used, only the current sample can be
transmitted from this menu.
To access the tools menu:
1.
Select the project location (if used) and store sample as
discussed earlier.
2.
Use the Tab keys
$@
to highlight
Sample
.
P r o j 1 : P R O J E C T A
S t d 1 : S T A N D A R D A
S a m p l e : # 9 9 : 5 1
L*a*b*
D65/10
......
....
∆
L* +0.05
L* 88.25
∆
a* —0.03
a* —4.71
∆
b* —0.14
b*+36.64
∆
E* 0.16
3.
Press the Enter
#
key to open the Tools menu.
T o o l s – S a m p l e 9
T r a n s m i t T h i s S a m p l e
T r a n s m i t P r o j S a m p l e
T r a n s m i t A l l S a m p l e s
D e l e t e T h i s S a m p l e
D e l e t e P r o j S a m p l e s
D e l e t e A l l S a m p l e s
Transmit This Sample
Transmits the current sample data out the serial port.
Transmit Proj Sample
Transmits all samples that exist in the current project.
Transmit All Samples
Transmits all samples stored in the instrument.
Delete This Sample
Deletes the current sample from the database.
Delete Proj Samples
Deletes all samples attached to the current project.
Delete All Samples
Deletes all samples stored in the database.
4.
Use the Tab keys
$@
to highlight the desired tools option
and press the Enter key
#
.
5.
Use the Tab keys
$@
to highlight
Yes
and press the Enter
key
#
to initiate the selected tools option.
Selected sample