X-Rite 939, Operator'S Manual

Page: 63 / 108

C H A P T E R F I V E
5-6
attributes. Pass/fail indication appears in QA and Strength
functions when set.
To access tolerance entry menu:
1.
Use the Tab keys
$@
to highlight
Tolerances...
.
E d i t S t a n d a r d : 1
S t d E n t r y : E m p t y
S t d N a m e :
T o l e r a n c e s . . .
S h a d e S o r t O p t s . . .
S t d L o c k : U n l o c k e d
D e l e t e T H I S S t d . . .
2.
Press the Enter key
#
to access the tolerance entry menu.
± T o l : S t d : 1
<
S e t E q u a l L i m i t s
>
L*a*b*
D65/10
Next
∆ L* ±0.00
∆
a* ±0.00
∆ b* ±0.00
SAVE
3.
Use the Tab keys
$ @
to highlight the Tolerance type. Press
the Enter key
#
to select the desired type.
4.
If entering different plus and minus values for L*a*b*,
L*C*h°, etc., use the Tab keys
$ @
to highlight the
plus/minus symbol in the upper left of the display. Press
the Enter key
#
to page through
±
,
+
, or
–
limit type.
5.
Use the Tab keys
$ @
to highlight the illum/obs parameter.
Press the Enter key
#
to select desired illum/obs.
6.
Use the Tab keys
$ @
to highlight the desired tolerance type
attribute. Press the Enter key
#
to open
Enter
Tolerance
menu.
NOTE: Depending on Limit Type selection,
Plus
or
Minus
could
appear in place of Symmetric.
E n t e r S y m m e t r i c T o l :
C L E A R
↓
0 . 0 0 0 0
↑
Save & Exit
NOTE: “
Standard cannot be changed”
appears in the display
when attempting to edit attributes with the standard locked. Refer to
Locking/Unlocking Standard later in this section for additional
information. Press the Enter key
# to clear the message.
7.
Use the Tab keys
$@
to choose the desired digit (arrows
above and below designate selection). Press the Enter key
#
to access the alphanumeric editor.
Ilum/Obs
Tolerance Limit Type
Tolerance Type
Tolerance type attributes