X-Rite 939, Operator'S Manual

Page: 60 / 108

I N S T R U M E N T O P E R A T I O N
5-3
2.
Press the Enter key
#
to access the Standard Entry menu.
M e a s u r e S t d : 1
<
M e a s u r e S t a n d a r d
>
L*a*b*
D65/10
......
....
L* 0.00
a* +0.00
b* +0.00
Measuring a Standard
1.
Make sure
Measure
appears in the upper left corner of the
display. If
Manual
appears, press the Enter key
#
to
toggle to Measure.
M e a s u r e S t d : 1
<
M e a s u r e S t a n d a r d
>
L*a*b*
D65/10
......
....
L* 0.00
a* +0.00
b* +0.00
2.
Position the instrument on the standard and take the
reading. Release the instrument when
Measurement Done
is displayed.
M e a s u r e S t d : 1
<
M e a s u r e m e n t D o n e
>
L*a*b*
D65/10
......
....
L* 23.30
a* –0.25
b*–28.03
SAVE
3.
Retake the measurement if necessary, or press the Enter key
#
with
Save
highlighted to store measurement. The screen
automatically advances to the next “empty” standard.
4.
Continue with additional measurements.
Locked Standards
When attempting to measure a standard with a locked standard
selected, a
Standard Locked: Create New Standard?
message appears. Select
Yes
if you want to create a new
standard and press the Enter key
#
. The standard must be
unlocked if you want to overwrite the existing data.
Refer to
Unlocking/Locking Standards later in this section.
Manually Entering Color Data
1.
Make sure
Manual
appears in the upper left corner of the
display. If
Measure
appears, press the Enter key
#
to
toggle to Manual.
Color data
parameters