X-Rite 939, Operator'S Manual

Page: 61 / 108

C H A P T E R F I V E
5-4
2.
Use the Tab keys
$ @
to highlight the color space parameter.
Press the Enter key
#
to select the desired color space.
M a n u a l S t d : 1
<
E n t e r C o l o r D a t a
>
XYZ
A/2
Next
X 0.00
Y 0.00
Z 0.00
SAVE
3.
Use the Tab keys
$ @
to highlight the illum/obs parameter.
Press the Enter key
#
to select the desired illum/obs.
4.
Use the Tab keys
$ @
to highlight the desired color space
attribute. Press the Enter key
#
to open
Edit Color
Data
menu.
5.
Use the Tab keys
$@
to choose the desired digit (arrows
above and below designate the selection). Press the Enter
key
#
to access the alphanumeric editor.
E d i t C o l o r D a t a :
C L E A R
↓
+ 0 0 0 . 0 0 0 0
↑
Save & Exit
NOTE : Positioning the arrows above and below
+
or
–
and
pressing
the Enter key # toggles between the two symbols.
6.
Use the Tab keys
$@
to highlight the desired number and
press the Enter
#
key to exit editor.
7.
Continue with additional digit edits if required.
8.
When editing is completed, use the Tab keys
$@
to
highlight
Save & Exit
and press the Enter
#
key.
9.
Continue with additional attribute editing for the selected
color space.
10.
When all attributes have been edited for the selected color
space, highlight
Save
and press the Enter key
#
.
11.
If additional color space editing is required, repeat Steps 2
through 11. Up to 10 manual settings can be defined for
each standard.
NOTE : Highlighting
Next
and continually pressing the Enter key
#
pages through the color space data that you have set.
Color space
attributes
Color space
Ilum/Obs