X-Rite 939, Operator'S Manual

Page: 31 / 108

C H A P T E R F O U R
4-2
Measure Options
The Measure Options configuration allows you to determine
the following settings:
•
Store Samples – Allows you to enable (on) or disable (off)
the measurement storage capabilities of the instrument.
When set to “On”, measured samples are stored in the
instrument database until manually deleted.
•
Pass/Fail – Allows you to enable (on) or disable (off) the
pass and fail capabilities of the instrument. When set to
“On”, the measured data is compared to the current standard
value (auto selected as closest color if Auto Std is On) and
the associated tolerance to determine pass/fail status.
•
Auto Std – Sets the automatic standard option. When Auto
Standard is enabled (on), the standard with the smallest DE
is automatically selected during a difference measurement.
When Auto Standard is disabled (off), a standard must be
manually selected before a difference measurement.
•
Averaging – Sets the averaging option. Selects the number
of readings averaged into a single measurement (0-99).
•
Diff Disp – Selecting “Numbers” causes delta values to
display during difference measurements. This option is
automatically enabled when standards are entered or
downloaded from a software program. When set to
“Words”, color difference is displayed as words (e.g.,
brighter, duller, etc.). This setting is only available for
L*a*b* and L*C*h° color difference data. When disabled
(off), no delta values are displayed during measurements.
NOTE: No words display for an attribute that is less than 1/7
th
of
the DE value. A value less than this amount is considered
insignificant compared to the total difference. Delta values
greater than 10.00 display numerically.
To open the Measure Options menu:
1.
Use the Tab keys
$@
to highlight
Measure Options
.
Configuration
L a n g u a g e : E n g l i s h
M e a s u r e O p t i o n s . . .
C o l o r O p t i o n s . . .
D e n s i t y O p t i o n s . . .
D a t a b a s e T o o l s . . .
↓
2.
Press the Enter
#
key to access the
Measure Options
menu.