X-Rite 939, Operator'S Manual

Page: 39 / 108

C H A P T E R F O U R
4-10
∆
E94 Factors...
L i g h t n e s s : 2 . 0 0
C h r o m a t i c i t y : 1 . 0 0
3.
Use the Tab keys
$@
to highlight the desired attribute. Press
the Enter
#
key to access the
Set
∆
E94 Factor
editor.
4.
Use the Tab keys
$@
to choose the desired digit (arrows
above and below designate the selection). Press the Enter
key
#
to access the alphanumeric editor.
NOTE : Highlighting
CLEAR
and pressing the Enter key # is a quick
method to zero the value.
5.
Use the Tab keys
$@
to highlight the desired number and
press the Enter
#
key to exit editor.
6.
When editing is complete, use the Tab keys
$@
to highlight
Save & Exit
and press the Enter
#
key.
Shade Sort
To select the shade sort status:
1.
Use the Tab keys
$@
to highlight
Shade Sort
.
C o l o r O p t i o n s
↑
S t r e n g t h : T r i s t i m u
M e t a m e r i s m : M I
∆
E c m c F a c t o r s . . .
∆
E 9 4 F a c t o r s . . .
S h a d e S o r t i s O f f
2.
Press the Enter
#
key to toggle between
Off
and
On
.
Density Options
The Color Options configuration allows you to determine the
following settings:
•
Current Status – Used to select the status for all density
functions. Available status: A, Ax, G, Tx, Ex, T, E, and I.
•
Auto Color –
Used to set the Auto Color option for
Density, Dot/Tone, and Print Contrast. An arrow (>)
indicates that auto color is active on the selected function.
•
Spec Dens/Dot –
Allows you to specify two wavelengths
between 400nm and 700nm as filters for density and dot.
The values can be selected in 10nm increments.