17
US/CAN/MEX: +1-518-289-1294 Toll Free Technical Support: +1-844-280-WYRE (9973)
ADV
ANCED OPERA
TION VIA PC SOFTW
ARE
2. VU Meter: graphically displays the number of audio channels detected (1-8).
3. Battery Stats: indicates unit battery life.
4. Standby Setting: Off/On. Useful for simulating a ‘power cycle’ of a sink device when connected to a extender or matrix device.
NOTE: Selecting ‘On’ puts the unit into standby, no signal can be received in this setting. Unit should be set to ‘Off’ as
default
5. EDID Setting: displays stored EDID settings (0-13) – 4 fixed EDID and 10 user-defined EDID.
-
0 - 4K60HZ(Y420)-3D-48BIT-2CH (PCM)
-
1 - 4K30HZ-3D-48BIT-2CH (PCM)
-
2 - 1080P-3D-24BIT-2CH (PCM)
-
3 - 1080P-24BIT-2CH (PCM)
-
4 to 13: User-defined slots for saving EDID settings
Advanced Operation via PC Software
Supplied with the TT-KIT-4K is Windows-based* control software to access the full functionality of the Generator and Analyzer via a PC,
including the display of signal information and detailed configuration of signal parameters within their respective interfaces.
Both the Generator and Analyzer can connect to a PC via RS-232 serial-to-USB or standard USB cables. WyreStorm recommends
using standard USB A to USB B as the easiest method of controlling and powering/charging the units.
*Compatible with Windows 7 operating systems or higher. Also compatible with Windows 10. Not compatible with iOS devices.
Set-up
1. Download both TT-GEN-4K and TT-SIG-4K software files from the
TT-KIT-4K product page
at wyrestorm.com and save to a PC.
2. Connect the PC to the generator or the analyzer using a USB A to USB B cable.
3. On the PC, open the appropriate software for the device that was connected in step 2.
NOTE: An external power supply is not required when connecting via USB as both devices receive power from the USB
port on the PC. An external power supply is only required when using RS-232.
Summary of Contents for TT-KIT-4K
Page 29: ...INSTALLATION NOTES...
