PH802 Advanced Configuration Manual
(5) Call pickup function
Call pickup function is kind of like pickup function of PBX, which means when A calls B, B rings
but no answer. Then C can input pointed B’s number to pick up the call and talk with A.
You can realize this function in dial peer menu as the picture shows below:
When C dial 0+B’s number, C can answer all B’s incoming call.
6
)
Joincall function. When there is conferencing call, if A want to be added in this exsiting
conferencing room, you can input the pointed prefix and the conferencing number to be in the
conference.
As the picture shows below, configure a certain prefix on A’s dial peer.
When A want to be in the conference, just dial 8+conference number.
7
)
Redial/unredial function. Usually, when Alice call Bob, but Bob is line busy.And Bob will get a
busy voice prompt to hang up the phone. To contact with Bob at the first time, you can use our
ip phone’s new redial function. A dials a certain Bob’s number, if Bob is free, then B
can pick up the phone to communicate directly. On the contrary, if Bob is line busy, Alice will
still get a busy voice prompt to hang up the phone. But with this function, Alice will
automatically find out Bob’s call status every 60s. Once Bob gets free, Alice will get a voice
ring to be told pick up the phone to dial Bob directly. However, if Alice isn’t available to
contact Bob, she may dial the certain Bob’s number to cancel this redial function. As the
picture shows below:
To enable redial function, A can dial 9+Bob’s number.
To disable this function, A can dial 7+Bob’s phone number.
Wuchuan Network Tech Co., Ltd
www.5111soft.com
25