PH802 Advanced Configuration Manual
reboot etc), this debug is O level.
1 level-alert, the info indicate the system have fatal problem
2 level-critical the info indicates the system have critical problem (e.g.: insufficient system
resource, upgrade file error etc)
3 level-error, the info indicate the mistake will influence the system
4 level-warning, the info indicate the system is work normally, but it may contain potential risk.
5 level-notices, the info indicate the system is normal under certain condition, please make sure
the environment and parameter is correct.
6 level-info, daily debug output info
；
7 level-debug, info for debug, mainly use to output the related debug info for the need of the
researcher, lowest but most output debug info
Presently the highest level of debug info display in syslog is 6 levels. debug level can be display
through TELNET.
3.8.4 Time Set
Server: SNTP server’s address
Timezone: select timezone where belong to.
enable daylight or not
Enable 12-hours system or not.
3.8.5 Reboot
When the user change some setting of the phone that require reboot to make it effect, click
“reboot”. The phone will automatically reboot. Please note, before reboot make sure all the
changes are saved otherwise after reboot will remain the same.
Wuchuan Network Tech Co., Ltd
www.5111soft.com
32
