PH802 Advanced Configuration Manual
Configure the LAN IP address which NAT mapped
Configure the LAN port which NAT mapped
Configure the WAN port which NAT mapped the phone
After configuration, click
and add it to the mapped table, click
and delete
it from the mapped table.
NAT configure example:
IP PHONE WAN PORT IP address is 192.168.1.110, Gateway or IP phone WAN PORT IP address
192.168.10.2, PC’s IP address is 192.168.1.111, see the below connection chart:
If user want to access the gateway and IP phone’s web configure page, he need configure NAT as
below:
After saving, NAT is OK. User can input http://192.168.1.110: 8080 to access the IP phone or
gateway’s web interface. When you input http
：
//192.168.1.110, you can access the IP phone
PH802’s web interface.
Note:
Please don’t configure outside port and inside port as the same port. Otherwise if you input
http://192.168.1.110, you can only access to gateway or IP phone’s web interface.
3.4.3 Net Service
Can set Telnet, HTTP, RTP, meanwhile can see the DHCP IP Lease table.
Wuchuan Network Tech Co., Ltd
www.5111soft.com
12
