PH802 Advanced Configuration Manual
Configuration Explanation:
Configure web browse port, the default is 80 port, if you
want to enhance system safety, you'd better change it into non-80 standard port
，
modify it and save
the setting, by the method of logging in
http://xxx.xxx.xxx.xxx
：
xxxx/
Configure telnet port, the default is 23 port
Enable RTP initial port configuration. It is dynamic
allocation.
Configure the maximum quantity of RTP port. The default is
200
Leased IP-MAC correspondence table of DHCP
Note: Should save and restore, then go into effect after modifying configuration on this page.
If the Telnet, HTTP port will be modified, the port is better to be set as greater than
1024,because the 1024 port system will save ports; Set the HTTP port as 0, then the http
service will be disabled.
3.4.4 Fireware Defence
Can set to input or output the firewall on this page
，
meanwhile can configure the input/output rules
of the firewall, use these configuration to protect some evil IP to browse the phone, improve the
security.
Access list is a simple module just like the CISCO visit controlling list (firewall defense). This
function supports two rules: input and output. Each rule will distribute one series number; every
kind of rule can allow to configure 10 pieces in max.
Wuchuan Network Tech Co., Ltd
www.5111soft.com
13
