PH802 Advanced Configuration Manual
the end IP of add the lease table. The quantity from the
beginning to the end depends on the enable IP quantity which connect to the devices in the LAN
port. The DHCP gain the address which connect with any device in the LAN port must be in the
range from the Start IP to the End IP.
(
The size of the lease table can not beyond the address
quantity of the net type C, recommend not to modify this, use the default lease table
)
Add the lease table net mask
Add the lease table default IP of phone’s LAN port
Add the lease table default DNS IP
;
Click “ADD” and
submit, then can add DHCP lease table;
Choose the deleted lease table name in the up down menu,
click “Delete” and submit, then delete the item from the DHCP Lease Table.
Note: If the user modify the DHCP lease table
,
need save the configuration and restart, then
go into effect.
3.4.2
NAT
Configuration Explanation:
Configure enable/disable IP Sec ALG, default off
Configure enable/disable FTP ALG, default on
Configure enable/disable FTP ALG
,
default on
After selecting, click “apply” and submit, then go into effect;
Configure the TCP of NAT and the
in-net mapped of UDP;
Configure the mapped protocol type of NAT, TCP or UDP
Wuchuan Network Tech Co., Ltd
www.5111soft.com
11