PH802 Advanced Configuration Manual
1. Preface
First of all, thanks very much for choose our IP phone---PH802, thank you for your trust in our
company.
Our IP Phone PH802 completely follows VOIP standard offered by ISO, setting in two Protocols:
SIP and IAX2, fully compatible with SIP industry standard and can interoperate with many other
SIP compliant devices and software in the market.
In order to make full use of our IP phone PH802 and getting the best return, please read the user
manual carefully before using it and keep the manual for reference.
This manual introduces the IP Phone PH802’s Installation, basic function, and special function,
we hope this could help you to understand all the function soon and use them proficiently.
Note: since the product update, the manual will change, please visit to our website
www.5111soft.com
to see about. We will do not inform you. Thank you for your understanding.
2. Installation
2.1 Installation
◆
Insert the power adapter’s plug into the phone front Power jack (DC 5V) and the 2-prong
plug end of which into grounded power outlet;
◆
Start up the IP phone by turning the front switch stated ‘ON’ & ‘OFF’ to ‘ON’;
◆
Connect the internet cable into wan port, and then follow below installation checking
way.
If need to set up small LAN network, find the LAN cable in the box and connect between
LAN port and your PC (PC is not required to set up for making a call)
3. WEB Config
z
Press SYSINFO under LCD display to check the phone’s IP address
z
Input the IP address in browser’s address bar, like http://xxx.xxx.xxx.xxx/. (If the WEB
logon port is 8080 instead of 80, you need to input the port at the end,
Wuchuan Network Tech Co., Ltd
www.5111soft.com
3