PH802 Advanced Configuration Manual
seconds, just after 5 seconds when receive a call, the user doesn’t dial the numbers, the phone will
think the user has dial out the numbers. The received number will be sending out as the called
number;
Dial rule configure explanation:
[]
is the digital range, It can be a range, a list of digital and can be divided by comma. X can be
any digital matched.
Tn
means the dial will ending in “N” second. N is forcible range from 0 second to 9 second. Tn
must be configured in the end. If you don’t configure Tn, the system default is T0, that is to say
once you finish dial, the call will try to connect.
Configure example:
[1-8]xxx
means the dial number from 1000 to 8999 will connect once the four digital is
dialed.
[0-3,6-9]xxx
means the number begin with 0-3 or 6-9 and plus any other three numbers (e.g.:
0123,9123) will connect once dialed
[0-2][6-8]xx
means the number begin with 0-2, followed by 6-8 and plus any other two
number(e.g. 1625, 2799) will connect once dial.
9xxxxxxx
means the number begin with 9 will connect once 8 numbers all dialed.
911
means the number 911, once you dial will connect.
99T4
means the number 99 will connect in 4 second after you dial them.
8[0-1,3-9]xx
means the number begin with 8 followed by 0-1, 3-9 and plus any other number
will connect once dial.
82xxx
means the number begin with 82 and plus three random number will connect once
dial. The configuration made the five digital number begin with 82 will connect once dial
3.4.8 Call Service
Value- Added Service Configuration
----- On this page, user can set value-added services such
as hot-line, call forwarding, call transfer (CT), call-waiting service, three way call, blacklist,
out-limit list and so on.
Wuchuan Network Tech Co., Ltd
www.5111soft.com
18