WTI PollCat NetLink NLJ-VIP, User Manual

Page: 219 / 266

19-19
Command Reference Guide
^B64 Enable / Disable Wrap Around Mode
(Supervisor Mode Only)
When the VIP's internal memory is full, the wrap
around mode allows new data to be written over older data. This allows the
VIP to continually recycle its memory.
Command Options:
^B64,1
Disable Wrap Around Mode (Default)
^B64,2 Enable Wrap Around Mode
Corresponding Menu Function:
System Parameters Menu, Item 5.
^B65 Select Alarm Filters
(Supervisor Mode Only)
Determines which user-defined Alarm Filter will
be used for PBX Port A, PBX Port B, and the AUX Port. This command
uses the following format:
^B65[,port][,filter] [Enter]
Where:
,port
Input Port: If this argument is omitted, ^B56 will assign the
selected filter to PBX Port A. Offers the following options:
,A PBX Port A (Default)
,B
PBX Port B (not available on NLJ-VIP)
,X
AUX Port (not available on NLJ-VIP)
,I
PBX IP Port
,filter Alarm Filter: Selects or disables the Alarm Filter. The
following options are available:
,1
Disable Alarm Filter at Selected Port (Default)
,2
Assign Alarm Filter #1 to Selected Port
,3 Assign Alarm Filter #2 to Selected Port
Corresponding Menu Function:
Port Configuration Menus , Item 15.