WTI PollCat NetLink NLJ-VIP, User Manual

Page: 165 / 266

16-15
Buffer Functions (Polling)
2. User Name: The name that the VIP will use when accessing the FTP
server. ( Up to 16 characters, default = undefined .)
3.
Password:
The password that the VIP will use when accessing the
FTP server. ( Up to 16 characters, default = undefined .)
4. Account: The account name that will be used to access the FTP
server. ( Up to 16 characters, default = undefined .)
5.
Directory:
The FTP Server directory that will receive files sent from
the VIP. ( Up to 48 characters, default = undefined .)
Note:
If several different VIP units will be transferring data to the
same FTP server, a unique directory / file name should be assigned
to each unit. This will prevent data from the various units from
overwriting each other.
6. File Name: The first four characters of the file name that the FTP
Push feature will assign to each "chunk" of data transferred from
this unit. The complete file name will include these four characters,
three characters which identify the source port, and one character
which identifies the data type. If desired, the VIP can also append
a sequentially numbered extension to each file name. For more
information, please refer to Section 16.4.1. (
Up to four characters,
default = undefined .)
Note:
If several different units will be transferring data to the
same FTP server, a unique file name / directory should be assigned
to each unit. This will prevent the VIP units from overwriting each
other's data.
7. File Mode: If "Append" is selected, each data transfer will be added
to the target file on the FTP server. If "Replace" is selected, each data
transfer will overwrite the target file. If the target file does not exist,
then both Append and Replace will create a new file.
( Default = Append .)
8. File Extension Increment: Enables / disables automatic sequential
numbering of file names created by the FTP Push feature. When
enabled, the VIP will append a sequentially numbered three digit file
name extension (000 to 999), which will be incremented for each new
file created by a successful data transfer. When disabled, the extension
will not be incremented. (
Default = Off
.)