WTI PollCat NetLink NLJ-VIP, User Manual

Page: 179 / 266

16-29
Buffer Functions (Polling)
Examples:
• If the base file name is defined as "
TEST
", and the File contains
standard, non-alarm data (
ST
) received via the AUX port (
X
), the file
name would be " TESTXST ".
• If the base file name is "
PBX
", and the file contains records that
matched Alarm Filter 2 ( A2 ), which were received via PBX Port B ( B ),
then the file name would be " PBXBA2 ".
• If the base file name is not defined, but the site ID is " ACME ", and the
file contains records that matched Alarm Filter 1 ( A1 ), which were
received via PBX Port A (
A
), then the file name would be "
ACMAA1
".
16.5.4. Commands Supported by FTP Server
The FTP Server function supports the following FTP commands.
• ABOR - Aborts the current FTP operation.
•
DELE filename
- Deletes the specified filename from the FTP
Server, where
filename
is the file you intend to delete. The DELE
command can only be applied to the last file read.
Note:
If a file transfer is aborted before completion, the DELE
command will still delete the target file, even though the file has not
yet been transferred to your remote PC.
• HELP cmdname - Displays help information for the specified
command (where cmdname is the target command.) If cmdname
is omitted, then the HELP command will display a summary of all
available FTP commands.
• LIST (Also DIR or LS ) - Displays a listing of all files residing in the
current directory at the FTP server.
•
NOOP
- (No Operation) Keeps the FTP connection alive without
actually initiating a command function.
• PASS password - The FTP client uses this command to submit the
user-entered password to the FTP Server (the VIP.)
•
PORT h1,h2,h3,h4,p1,p2
- Sends the client's IP address and
port number to the FTP Server, where
h1,h2,h3,h4
is the IP
address and p1,p2 is the port number.
• PWD - Displays the current active directory at the FTP Server.
•
QUIT
- Terminates the FTP connection.
•
RETR filename
- Retrieves the specified file from the FTP Server,
where filename is the desired file.