WTI PollCat NetLink NLJ-VIP, User Manual

Page: 128 / 266

11-2
PollCat NetLink-VIP & PollCat NLJ-VIP - User’s Guide
8. Output Contacts: (Optional) Defines the open/close operation that
will be performed by the optional Output Contacts when this alarm
generates an Output Contact action. An "O" indicates the contact will
be opened, "C" indicates the contact will be closed, and a dash (
-
)
indicates that the status of the contact will not be changed.
9. Message: The message sent when a Callout, Alphanumeric Page,
SNMP Trap or Console action is generated.
10.
Auto Execute:
If enabled, the VIP will execute the command string
defined under item 11 when a Callout or Console action is generated
by this alarm.
11. Execute Commands: The Auto-Execute command string. This
command string consists of a series of ^Bxx commands with each
command separated by a backslash and forward slash character
(e.g. \/03\/01 ). ^Bxx commands are discussed further in
Section 19. For more information, please refer to the example in
Section 13.3. (Up to 64 characters;
Default = undefined
.)
Note: In order for Auto Execute to function, item 10 must be
enabled, the command string must be defined, and either a Callout
or Console action must be selected.
12.
Email To:
This item is used to select the recipient(s) for emails
that are generated by this alarm. The submeu for this prompt allows
you to select either, both or none of the two email recipients that
are defined via the Send Email Configuration Menu, as described in
Section 5.4.5.1.
(Default = Email #1.)
80% FULL ALARM:
1. 80% Full Alarm: Off
2. Action: None
3. Phone #: (undefined)
4. Pager ID 1: (undefined)
5. Pager ID 2: (undefined)
6. Pager ID 3: (undefined)
7. SNMP Mgmt: Manager #1
8. Output Contacts
1/2/3/4: -/-/-/-
9. Message: (undefined)
10. Auto Execute: Off
11. Execute Cmds: (undefined)
(Cont):
12. Email to: Email #1
Enter selection,
Press <ESC> to return to previous menu ...
Figure 11.1: The 80% Full Alarm Configuration Menu