WTI PollCat NetLink NLJ-VIP, User Manual

Page: 80 / 266

7-16
PollCat NetLink-VIP & PollCat NLJ-VIP - User’s Guide
7.13. Auxiliary Port Status Screen
This screen lists parameters for the Auxiliary Port. Parameters are selected
via the Port Configuration menu (Section 5.4.2).
Note: NLJ-VIP units do not include the AUX Port.
• Communication Settings: Lists Baud Rate, Parity, Data Bits, Stop
Bits, and Handshake Mode for the Auxiliary Port.
• Input Parameters: Lists input parameters for this port:

Time Date Stamp:
When enabled, the time and date will be
inserted into records received via this port.

Serial Number Stamp: When enabled, a serial number will be
inserted into records received via this port.

Strip Non-Print:
When enabled, the VIP will remove non-printable
characters from all records received via this port.

End Character: The selected End-of-Record character for
this port.

Alarm Filter:
The Alarm Filter selected for this port.

Store Alarm Data: Indicates where the VIP will store alarm
records received via this port.

Data Filter: The Data Filter selected for this port.

PBX Inact Alarm:
The PBX Inactivity Alarm selected for
this port.

Port Mode: The selected operation mode for the AUX Port; either
Store Data or Discard Data.
PollCat NetLink-VIP Version 1.06 11/08/2005 Tue 11:43 1% Full
AUXILIARY PORT:
COMMUNICATION SETTINGS
Com Settings: 9600,E,7,1,None
INPUT PARAMETERS
Time/Date Stamp: Off
Serial # Stamp: Off
Strip Non-Print: On
End Character: ^J
Alarm Filter: None
Store Alarm Data: Alarm
Data Filter: None
PBX Inact Alarm: None
Port Mode: Store Data
Press <Enter> to return to menu ...
Figure 7.14: Auxiliary Port Screen