WTI PollCat NetLink NLJ-VIP, User Manual

Page: 83 / 266

7-19
Status Screens
7.15. Modem Port Status Screen
As shown in Figure 7.16, this screen lists parameters for the Modem Port.
Modem Port Parameters are selected via the Modem Port Configuration
Menu (Section 5.4.4.)
• Communication Settings:

Com Settings:
Baud Rate, Parity, Data Bits, Stop Bits, and
Handshake Mode for the Modem Port.

Reset String: The Modem Reset String.

Init. String: The Modem Initialization String.

Hang-Up String:
The Modem Hang-Up String.
• General Parameters:

Command Echo: When enabled, commands will be echoed back
to the polling device.

Response Type:
Upon login, this port will either display the Main
Menu immediately, or wait until [Enter] is pressed.

"Sure" Prompt: When enabled, a prompt is displayed before
certain irreversible commands are completed.

CMD Port Timeout:
The command mode timeout value.

Audit Trail: When enabled, the VIP will log command activity.
PollCat NetLink-VIP Version 1.06 11/08/2005 Tue 11:45 1% Full
MODEM PORT: Modem Installed
COMMUNICATION SETTINGS OUTPUT PARAMETERS
Com Settings: 57600,N,8,1,RTS Output Mode: ASCII Record
Reset String: ATZ Data on ^B01: On
Init String: ATE0M0Q1&C1&D2S0 Hold “End Data”: On
(Cont.): =1 Line # Tag: Off
Hang-Up String: (undefined) Send Compressed: Off
(Cont.): Auto Delete: Off
OUTPUT PARAMETERS (BINARY BLOCK)
Transmit Attempts: 3 Att/5 Secs
GENERAL PARAMETERS DLE Stuffing: Off
Command Echo: On
Response Type: Inhibit Menu CALLOUT PARAMETERS
“Sure” Prompt: On Dial Attempts: 3
CMD Port Timeout: 15 Mins Sequence Attempts: 3 Att/10 Mins
Audit Trail: Off Immediate Callout: Off
Immediate Phone #: (undefined)
ACTION PARAMETERS (Cont.):
Action Delay: 300 Secs Dialback Security: Off
Press <Enter> to return to menu ...
Figure 7.16: Modem Port Status Screen