WTC MedWeld 3005, Operator'S Manual

Page: 20 / 206

=UTGU\T# %?fUbfYUg
!$ =UTGU\T# %?`UbQd_bµc7eYTUD)## "
= #" "%1`bY\" "
&KDVVLV
A 4-slot chassis mounts the SLC processor, WTC weld processor
and two interface modules. (The latter can be either RIO Network
and local modules or the DIO input and output modules.)
Figure 2:
1\\U^2bQT\Ui$C\_d
3XQccYcgYdX@_gUbCe``\i
$OOHQ%UDGOH\
Œ
3RZHU6XSSO\
The power supply provides power to the Allen-Bradley
programmable controller. It also supplies the power needed for
I/O communications and external programming devices.
>?D5*
The power supply DOES NOT occupy a slot in the chassis. It mounts on
the left side with two Phillips-head screws located in the top and bottom
right corners, under the faceplate.
6/&3URFHVVRU
The Allen-Bradley SLC-500 processor provides the interface
between the MedWeld 3005 processor module and any
automation system or welding station.
(Refer to “Available Configurations” on page 1-24, and the
integration options described in “RIO Integration” on page 1-8
and “Discrete I/O Modules” on page 1-13.)
Figure 3:
1\\U^2bQT\UiC<3%
@b_SUcc_b
A-B Power
Supply
SLC-500 Module
MedWeld 3005
Weld Processor Integration
modules