19
6.0 Trouble shooting
7.0 Disposal information
Disposal
The machine, accessories and packaging should be sorted
for environmental-friendly recycling.
.
Only for EC countries:
Do not dispose of power tools into house-
hold waste! According the European Guideli-
ne 2002/96/EC for Waste Electrical and
Electronic Equipment and its implementation
into national right, power tools that are no
longer usable must be collected separately and disposed
of in an environmentally correct manner.
Subject to change without notice
8.0 Guarantee
The warranty period for new Wolff machines shall last for
one year from the point at which the machine is transfer-
red / delivered to the customer, insofar as statutory legal
requirements do not stipulate otherwise.
When validating warranty claims, the invoice or proof of
purchase must always be submitted. All repairs within the
framework of the warranty agreement must be undertaken
by a service Centre that has been accredited by us.
Customers performing their own repairs and/or improper
repairs regularly lead to the exclusion of warranty claims.
The same also applies to incorrect operation and/or use.
Replacement of parts, accessories and other modifi ca-
tions to Wolff machines
Users of Wolff machines enjoy a high level of safety and
reliability of their machine. In order to maintain this status
quo, your Wolff tool may not be modifi ed from the condition
in which it is delivered without following the rules below.
These rules apply to both the replacement of parts and
equipping the machine with accessories as well as other
technical modifi cations.
r
All work undertaken to your Wolff machine must
be
undertaken exclusively by a workshop
that
has suitably trained and experienced personnel at
its disposal, as well as the requisite work equip-
ment. We recommend using authorised service
Centre.
r
In the event of planned replacement of parts, plan-
ned addition of accessories or other planned
technical modifi cations, an assessment must al-
ways be carried out by an authorised service
Centre or us, as manufacturer, before work is com-
menced.
r
It is highly recommend that only safety-approved
Original Wolff replacement parts and Original Wolff
accessories are used, which have been approved
by us, as manufacturer. Replacement parts and
accessories can be obtained from your authorised
service Centre, which will also be able to undertake
professional installation on your behalf. Original
Wolff replacement parts and Original Wolff acces-
sories have been checked for safety and suitability
especially for Wolff machines.
We are unable to adequately assess the safety and
suitably of non-Original Wolff replacement parts.
r
In order to preserve operational safety and to pre-
vent damage in the event of technical modifi cati-
ons, of whatsoever nature, our technical guidelines
must always be observed.
We are also always
happy to hear from you should you have any other
questions about your Wolff machine.
Please note that we cannot accept any liability for
damage, insofar as this is sustained as the result of
incorrect work undertaken or as the result of violation
of the rules stated above.
EN
Machine does
not start after
draining the
heater fan
Sensor linear
guide (Fig. A pos.
12) not trigge-
red
Have the fault rec-
tifi ed by a qualifi ed
electrician or repla-
ce the parts.
Unit does not
heat
Heating element or
control defective
Have the fault locali-
zed and rectifi ed by
a specialist work-
shop
Display not lit
Power supply inter-
rupted, fuse, cable
or plug defective
Check whether the
sensor lights up
when the heating air
blower is drained,
otherwise have it
replaced by a spe-
cialist workshop.
Instead of the
temperature,
„Error Temp“
is displayed
Damage to the tem-
perature sensor
Have temperature
sensor replaced in
specialist workshop
Fault
Possible cause Remedy