WOLFF 163317, Translation Of The Original Instruction, Page: 14 / 28

14
Declaration of Conformity
We declare under our sole responsibility that this product
is in conformity with the following standards of standardiza-
tion documents:
DIN EN ISO 14118, EN ISO 12100, DIN EN 60335-1, DIN
EN 60335-2-45, DIN EN 55014-1, DIN EN 55014-2,
according to the provisions of the: 2006/42/EC,
2014/30/EU, 2014/35/EU, Electrical Safety Act 2002.
Dipl.-Ing. (FH) Dieter Hammel Authorised to issue
this declaration and for the gathering of
the technical documentation.
08.02.2018 i.V.
Uzin Utz Tools GmbH & Co. KG GmbH & Co.KG | 74360 Ilsfeld | Ungerhalde 1
Technical data
Supply voltage...................230V AC, 15A (120V AC, 13A)
Power consumption..............................3400 W, (1600 W)
Air temperature....................adjustable from 25 to 650°C
Speed display ........................................... Digital display
Travel speed.................................1.0 m/min to 7.7 m/min
Weight........................................................................17 kg
Includes:
1 Weldmaster 2.0
1 Carrying case,
1 Operating manual
EN
2.0 Safety Warnings
2.1 General Power Tool Safety Warnings
Read all safety warnings and all
instructions.
Failure to follow the warnings and instructions may result
in electric shock, fi re and/or serious injury.
Save all warnings and instructions for future reference
The term “power tool” in the warnings refers to your
mains-operated (corded) power tool or battery-operated
(cordless) power tool.
1) Work area safety
a) Keep work area clean and well lit.
Cluttered or dark areas invite accidents.
b) Do not operate power tools in explosive atmosphe-
res, such as in the presence of fl ammable liquids,
gases or dust.
Power tools create sparks which may ignite the Dust
or fumes.
c) Keep children and bystanders away while opera-
ting a power tool.
Distractions can cause you to lose control.
2) Electrical safety
a) Power tool plugs must match the outlet. Never
modify the plug in any way. Do not use any adapter
plugs with earthed (grounded) power tools.
Unmodifi ed plugs and matching outlets will reduce
risk of electric shock.
b) Avoid body contact with earthed or grounded sur-
faces, such as pipes, radiators, ranges and refrige-
rators.
There is an increased risk of electric shock if your
body is earthed or grounded.
c) Do not expose power tools to rain or wet conditi-
ons.
Water entering a power tool will increase the risk of
electric shock.
Attention