WMF PROGRAMAT 4 7500 Operating Instructions Manual Download Page 51

Page: 51 / 54

112

CONTROL INDICATORS

The following control indicators inform the operator about certain operating conditions.

CONDITIONS:

DISPLAYS:

Coffee storage urns empty; no dispensing of full portions;
Coffee dispensing is blocked.

Automatic machine warm-up.

↑

In key position

“T“

, the display indicates programmed

shutdown 10 minutes before machine is disconnected.

Caution! >>> Timer

Turn Off Time: 10:30

In key position

“T“

, the display indicates programmed

machine start-up.

Turn On >> Timer

Tuesday 07:50 1-2L

This display alternate after switching on if the service
interval or set number of brews has been exceeded.

Maintenance !
> WMF Field Service

WMF PROGRAMAT 4 with multicounter

In the personnel registration mode, display indicates an
unregistered waiter.

Waiter Pen

-- No Access --

During PIN operation, display asks operator to enter
5-digit PIN.

** Pass Word? **

-- ????? --

DISPLAYING DATA:

DISPLAY INDICATORS:

96 C Nx. Maint. 07.00

Nx. Delim.: 00033 / 12500

DISPLAYING PREPARATION TIME

Coffee Storage Time:

Fr: 07 min BR: 10 min

Summary of Contents for PROGRAMAT 4 7500























































Search results

Summary of Contents for PROGRAMAT 4 7500

Reviews:

Brands by name

Popular brands

WMF PROGRAMAT 4 7500, Operating Instructions Manual

Search results

Summary of Contents for PROGRAMAT 4 7500

Reviews:

Brands by name

Popular brands