74
To reduce the previous selection, press the key.
Note:
In the case of manual brew quantity selection, choose the
lowest output level needed for operation. Increase stored
quantity only if absolutely necessary. Always adjust the
output according to operating performance – this way storage
time can be reduced and the coffee is fresh at all times.
5.3.2
AUTOMATIC SELECTION OF BREW
QUANTITIES
Usage:
Position
“W“
(“ON“ with selection options)
After the warm-up phase or when the operator key switch
5
is in position
“W“
, the display indicates:
Sel: 0L 8:17 W
Actl: 0.0L 10.01
For automatic selection of brew quantities, press key.
The display indicates:
Auto: 1-2L 8:17 W
Actl: 0.0L 10.01
According to the output of the past few minutes, this
automatic brewing program calculates short-term anticipated
output. Based on this output, the best brew quantity selection
is calculated, set automatically and displayed.
Possible indications:
Auto: 1-2L 8:17 W
Actl: 0.0L 10.01
Auto: 1-3L 8:17 W
Actl: 0.0L 10.01
Auto: 2-4L 8:17 W
Actl: 0.0L 10.01
Auto: 2-8L 8:17 W
Actl: 0.0L 10.01
Note:
The automatic brewing charge selection is ideal for
continuously varying degrees of output. Should the output
change at short notice, the selection can be adjusted manually
by pressing the
keys.
For continuously varying output
Output
Time
8.00 am
12.00 pm 4.00
pm
