108
Display:
Cleaning Powder
Confirm / ENTER
Open the machine door
3
and insert appr. 100 g
WMF Special Cleaning Powder in brewing unit (Fig 8).
Caution!
Do not reach into brewing unit
30
.
Danger of crushing!
Fig. 8
Once the cleaning powder is inserted, close machine
door
3
and start cleaning cycle with
“ENTER“
key.
Display:
Caution! Cleaning On
-- No Coffee Supply --
Do not add
Deliming Powder!
If the key switch is in position
"R"
after completion of the
cleaning cycle, the display indicates the following:
Cleaning Prog.
Finished
To disconnect the machine, turn operator key
5
to
position
“0“
. This can be done after cleaning as well as
immediately after the start of the cleaning cycle.
Both of the storage urns remain filled with clean water
until the next machine start-up.
8.2
WEEKLY CLEANING
a)
Cleaning of the ground coffee hopper
-
Once per week
, the filling of the ground coffee
hopper
1
should be monitored closely and the amount
reduced so that there is only very little coffee left at the
end of the day’s operation.
Caution! Danger of crushing!
Do not reach into ground coffee hopper
1
during operation
of the machine.
30
