82
To access the WMF PROGRAMAT 4 programming mode,
press the
“ENTER“
key.
Celebration Prog4
/ < / > / ENTER
This display is the starting point for the following
programming options:
6.1
PROGRAMMING TIMER SELECTIONS
The following selections are available:
-
Time / Date (see
6.1.1
)
-
Start-up and shutdown (see
6.1.2
)
-
Cleaning cycle (see
6.1.3
)
-
(only with liquid cleaning cycle)
-
Selection of brewing charge (see
6.1.4
)
6.1.1
PROGRAMMING TIME / DATE
You are in the WMF PROGRAMAT 4 programming mode.
Press
“ENTER“
key.
Calibration Prog4
/ < /
> / ENTER
To access timer selection mode, press key.
Set Metering Volumes
/ < / > / ENTER / EXIT
To access timer selection press
“ENTER“
key.
Set Times & Dates
/ < / > / ENTER / EXIT
To program time and date press
“ENTER“
key again.
Set Hour / Date
/ < / > / ENTER / EXIT
Select the appropriate day (e.g. Sunday Monday), then
press the key to program the hour.
Sunday 10:13
Year: 2000.12.01
To program the current hour, press the (e.g. 10.00
11.00) or the key (e.g. 10.00 9.00).
Sunday 10:13
Year: 2000.12.01
Use the same procedure to program the minutes (13), the
year (Year: 2000), the calendar day (12) and the
calendar month (01).
If the time and date are programmed correctly, turn key
switch to the desired position to exit the programming
sequence.
