87
To make sure that your selections have been programmed
correctly, turn the key switch to position “I“ or “W“ and
check the quantity of dispensed coffee and hot water.
1 impulse = appr. 2,5 cm³ coffee
1 impulse = appr. 8,0 cm³ hot water
6.3
SELECTION OF GROUND COFFEE QUANTITY
Position
“E“
(Programming)
Since different kinds of coffee may fluctuate considerably in
density and therefore in specific weight, the
WMF PROGRAMAT 4 can be programmed for ground
coffee quantity.
CHECKING THE PORTIONED GROUND COFFEE
QUANTITY
WMF customer service will be pleased to assist you in
checking the actual gram throw of the portioned ground
coffee. They have the ability to determine the exact weight of
the portioned ground coffee.
GROUND COFFEE SELECTION
Please note that the displayed figures represent impulses and
not actual grams (1 impulse = appr. 0,8 g ground coffee).
Should the coffee be too weak or too strong, correct ground
coffee quantity according to the following instructions:
Calibration Prog4
/ < / > / ENTER
Set Metering Volumes
/ < / > / ENTER / EXIT
Set Coffee Powder
/ < / > / ENTER / EXIT
1L:
072
means that 072 impulses of ground coffee are
portioned to brew 1 litre (1L/
Selection: 1 – 2L)
. To change
Coffee Throw Weights
1L: 072 2L:108 4L:180
the selection accordingly, press the
keys.
In this display the ground coffee quantity
108
for the 2 litre
(2L) brewing charge
(Selection:
1 – 3L, Selection: 2 – 4L)
Coffee Throw Weights
1L: 072 2L: 108 4L: 180
can be changed by pressing
.
