■
Do not work alone if hazardous conditions exist.
■
Never assume that power is disconnected from a circuit. Always check.
■
Never open the enclosure of t
he router’s internal power supply.
■
If an electrical accident occurs, proceed as follows:
–
Use caution; do not become a victim yourself.
–
Turn off power to the device.
–
If possible, send another person to get medical aid. Otherwise, assess
the victim’s
condition and then call for help.
–
Determine if the person needs rescue breathing or external cardiac compressions; then
take appropriate action.
Preventing Electrostatic Discharge Damage
Electrostatic discharge (ESD) can damage equipment and impair electrical circuitry. It may occur if
electronic printed circuit cards are improperly handled and may cause complete or intermittent
failures. Always follow ESD prevention procedures when removing and replacing modules:
■
Ensure that the router chassis is electrically connected to earth ground.
■
Wear an ESD-preventive wrist strap, ensuring that it makes good skin contact. Connect the clip
to an unpainted surface of the chassis frame to channel unwanted ESD voltages safely to ground.
To guard against ESD damage and shocks, the wrist strap and cord must operate effectively.
■
If no wrist strap is available, ground yourself by touching a metal part of the chassis.
1.4
Mounting, fastening
The edge of the bopla aluminum enclosure of the device can be fixed by optionally with an
AB800MKL fixation part to a C-rail. You can also mount the enclosure to wall, place into server rack
or similar fixation opportunity.
Please note that close metal parts, the cabinet metal material and the industrial conditions as the
usage of high rate power or other external gained radio frequency signals can cause radio signal
disturbance and could cause weak wireless signal at reception or data transmitting or could cause
less effective signal reception, weak wireless fidelity. In any of these, we recommend you to test
the wireless signal reception and quality and if it is necessary use external, magnetic mount antenna
which is leaded outside of the cabinet and placed onto the cabinet’s surface –
to ensure enough
reception. You can use an external magnatic mount antenna is you want.
