1.6 First start
The router is provided with pre-installed system (which contains the operating firmware and the
OpenWrt
®
system, which is accessable on the local website of the router).
1.
Connect the
microfit connection
power connector
(1) when the router begins its operation,
where the LED lights will be signing and inform you about the current status of the device.
Current and consumption
•
Power voltage: 12..24 VDC
•
Current: 160-260mA, 12V DC
•
Consumption: 1.9
–
2.4W
2.
When starting the device
(at power on)
–
and in case of rebooting
–
all the three LEDs
of the router
will active for a few seconds.
LED1
LED2
LED3
3.
Then the
LED1
light is lighting continously by
green
, which signs that the system is during
loading (boot in progress).
LED1
LED2
LED3
4.
The system start requires about 1-2 minutes, while the device loads the necessary modules
or the operation and prepares the web configuration user interface
–
the
LED2
will sign it.
Then the web interface will be availble for login.
5.
Configure the device’s wireless internet module settings
(SIM and APN data on the
router web interface)
for the cellular internet connection
–
otherwise the router will be
restarting in ever 10 minutes.
9-24V DC power voltage input (interface nr. 1) should be used by the DC powering with
the microfit connection 12V DC power adapter, or you can use alternatively 9-24V DC
power voltage with own cabling (follow the pinout hints).
