5.
Connect an UTP cable
to the
router
’s
Ethernet
titled RJ45 port (6). During the
configuration the cable’s opposite connector must be connected to the
PC
’s Ethernet port.
(After the configuration connect it to the network-
or industrial device’s
RJ45 port.)
6.
You can also configure the router through the
micro-USB slot
(4) by a microUSB-USB cable
of the PC connection.
7.
If you have ordered the device with RS232/RS485 expansion
, connect the RS485
meter to the
RS485
port (10) to receive the data of the meter. You can connect external
device to the
RS232
port (11).
Cables:
The following cables are not part of the product, these accessories are not included in
the product box.
To select and use the right type of cable, we list the recommended cable types and requirements
below.
DC power cable:
Type: min. 70 cm, OMYA type, 2 x 1 mm^2, halogen-free, double insulated wire pair, up to min.
24V DC breakdown voltage, colour signed cabling, blanked on the cable end
–
for supporting the
24V DC power voltage.
Connector: 4-pins microfit
Function: 12V DC (9..24V DC) power voltage for
device
For the connection it is recommended to use the
12V DC microfit connection power adapter or a
12V DC supply according to the pinout which can
be seen on the next figure.
